Fenwal 05-343261-143 Ignition Control Board, Replacement

SERIES 05-34 PROVED HOT SURFACE IGNITION SYSTEM

This proved hot surface ignition system is the ,solution for direct burner ignition on appliances rated over 400,000 BTUs and provides an efficient way of igniting your gas burner. Its wide selection of features makes it the most versatile system available.

VERSATILE TO MEET YOUR SPECIFIC NEEDS
Depending on the model selected, this proved ignition system module can be factory preset to work with any manufacturers 120 VAC silicon carbide ignitor. Its designed for igniting systems above 400,000 BTUs, but can be used on any gas-fired appliance. The system is available in single or multiple trial-for-ignition models, with options including prepurge and postpurge periods, inducer blower control and diagnostic outputs.

AGENCY CERTIFIED
The 05-34 is a proved interrupted-type ignition system and conforms to ANSI 221.20 and UL 372. This system is certified by the American Gas Association for use with natural or propane gas. It is also certified by the Canadian Gas Association and is a U. L. recognized component,

EFFICIENT OPERATION
Flame sensing is achieved through the patented technique of using the hot surface element as the sensor. However, if required, a separate sensing probe can be supplied. All models utilize the principle of flame rectification to monitor the burner flame, In addition, a self diagnostic circuit checks the valve control and the flame rectification Circuit before the ignition sequence is initiated.

COMPACT SIZE - EASY TO MOUNT
The electronic package measures only 3.93 x 5.68 x 1,60 in (99.8 x 144.3 x 40:6 mm) and weighs approximately 6 oz (180 g). It is not position-sensitive and may be mounted vertically or horizontally using #8 hardware. Connections may be made easily with quick connect or AMP MATE-N-1_01( connectors.

SPECIFICATIONS