Fenwal 05-306436-153 Ignition Module

SERIES 05-30 12 VDC DIRECT SPARK IGNITION SYSTEM

This direct spark ignition system provides an efficient and reliable way of igniting your gas fired appliances in recreational vehicles and other 12 VDC applications. It also features those options most demanded by design engineers.

INNOVATIVE DESIGN FOR SAFE AND EFFICIENT OPERATION
Flame sensing is achieved through the technique of using the high voltage spark electrode as the sensor. However, if required, a separate sensing probe can be supplied. Both models utilize the principle of flame rectification to monitor the burner flame. In addition, a patented* self-monitoring safety circuit provides a type of protection not found in other ignition systems.

AGENCY CERTIFIED
The 05-30 system is certified by the American Gas Association as conforming to ANSI Z21.20. It is also certified by the Canadian Gas Association and is a UL recognized component.

COMPACT SIZE - EASY TO MOUNT
The electronic module measures only 3.42 x 4.42 x 2.20 in (87.0 x 112.4 x 50.8 mm) and weighs approximately 6.6 oz (185 g). It is not position-sensitive and may be mounted vertically or horizontally using #6 hardware. The low voltage connections are made easily with a Molex edge connector and a V4 inch quick connect is used for high voltage connections.

SELECT FEATURES TO MEET YOUR SPECIFIC NEEDS
Depending on the model selected, flame sensing is achieved through the high voltage electrode or a separate flame sensing electrode. The system is available in single or multiple trial-for-ignition versions. Also selectable are a 15 second prepurge period and the length of the trial-for-ignition period

SPECIFICATIONS